Bicycle - Suspension
FORK JUICE
view bottle

Packing: 400 mL

Fork Juice

Fork Juice is where it all started for Juice Lubes and since releasing the product in 2009 we have sold tens of thousands of units to happy and now stiction- free riders, all over the world. It’s been much imitated since but is still the original and the best. Fork Juice suspension lube is a quick, easy, great value prevention or cure for stiction related suspension problems. It’s used by riders, racers and weekend warriors alike for all or any of the following:

  • Improving small bump sensitivity. By reducing the friction between stanchion and seals less input force is required to overcome the initial inertia and start the suspension moving through its stroke. What this means for your arms and hands is a smoother bar feel as small bumps that weren’t previously large enough to get the suspension moving now result in very small suspension movement. So it’s the suspension absorbing these little hits and not you! Check out the fork juice video on this page to see our little demonstration of this.
  • Eliminating the negative effects of tight seals on new forks while they are still bedding in - so you get better performance straight out of the box.
  • As a race prep to keep your steed running smoother and faster during your run.
  • General good maintenance - as the single most expensive component on your bike, it makes sense to lubricate your suspension. After all, you wouldn’t ride without applying lube to your chain would you? Using Fork Juice reduces the chances of crud sticking to the stanchion in the first place which means less chance of scratching them and less muck in the internals, so you get better performance for longer!

We are not saying it’s a replacement for a full strip down, service, new internals and rebuild; but then we are not asking you to hand over £80 either.

Directions:

Application is simple - wipe any residual dirt or grease off the stanchions and shock shaft and then make sure you cover up your brake disks and pads because it will make them forking slippery too!

Re-apply as required by frequency of riding, distance covered, terrain and conditions.

https://www.youtube.com/watch?v=kzGpM2WGitY

Synthetic SVI 2.5
Suspension Fluids
view bottle

Packing: 1L

Synthetic SVI Suspension Fluids
(SVI 2.5)

SVI Suspension Fluids are blended using technologically advanced synthetics together with the very latest additive technology to improve foaming tendencies and prolong seal life.

Features
  • Extremely high viscosity index to maintain damping at elevated temperature whilst ensuring correct suspension operation at low temperatures.
  • Stable under pressure and are compatible with air, nitrogen or argon charged suspension systems.
  • Suitable for use in cartridge forks, in particular SVI 5 (Cartridge 01).
  • Should the need for more precise damping be required SVI Suspension Fluids range are all fully compatible with each other and will mix with ease.
  • Excellent anti-wear protection and a high resistance to water contamination and degradation.
  • Excellent performance and longer service life, especially under extreme conditions of use such as racing.

Typical Physical Characteristics
Product SVI 2.5
ISO VG ??
Density @ 15° C ??
Viscosity@40°C (cSt) ??
Viscosity@100°C (cSt) 2.5
Viscosity Index 2.5
SVI Suspension
Fluids
view bottle

Packing: 500 mL

SVI Suspension Fluids
(SVI 5 / SVI 7.5 / SVI 10 /SVI 15 / SVI 20 / SVI 30)

SVI Suspension Fluids are blended using technologically advanced synthetics together with the very latest additive technology to improve foaming tendencies and prolong seal life.

Features
  • Extremely high viscosity index to maintain damping at elevated temperature whilst ensuring correct suspension operation at low temperatures.
  • Stable under pressure and are compatible with air, nitrogen or argon charged suspension systems.
  • Suitable for use in cartridge forks, in particular SVI 5 (Cartridge 01).
  • Should the need for more precise damping be required SVI Suspension Fluids range are all fully compatible with each other and will mix with ease.
  • Excellent anti-wear protection and a high resistance to water contamination and degradation.
  • Excellent performance and longer service life, especially under extreme conditions of use such as racing.
Typical Physical Characteristics
Product SVI 2.5 SVI 5 SVI 7.5 SVI 10 SVI 15 SVI 20 SVI 30
ISO VG 10 15 22 32 46 68 100
Density @ 15° C 0.841 0.850 0.857 0.867 0.870 0.879 0.880
Viscosity@40°C (cSt) 9.0 15.4 22.0 33.2 45.4 67.8 100.0
Viscosity@100°C (cSt) 3.5 4.6 6.2 6.8 8.5 9.7 11.3
Viscosity Index 350+ 243 259 170 168 145 99